주요 콘텐츠로 건너뛰기
도움말
6단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Remove tape that holds LED board. The LED board is taped to the battery assembly.

Three wires or a ribbon cable connect this board - be careful not to bend these wires - they break easily and it's almost impossible to get to them. I suggest you tape where they join to the main board while you work on it so they don't keep bending back and forth.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.