1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Use a heavier plastic opening tool or spudger inside the gap that you began to open up, sliding it further down each side of the case.
You may find it easier to go in short steps, prying the rear case away from the frame slightly before advancing
There are 3 plastic clips on one side and 2 on the other; in these areas you will have more resistance when sliding/prying. Slowly apply more pressure and they should release with a click
« 이전
다음 »
귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.
다음 줄
이전 줄
아래에 새로운 줄 삽입
위에 새로운 줄 삽입
현재 줄 들여쓰기
현재 줄 내어쓰기
현재 줄 삭제
다음 단계로 이동.
이전 단계로 이동.
도움말 열기