도움말
2단계 편집 중 —

알림: 귀하는 지금 열람하신 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 모든 20 안내서에 영향을 미칩니다.

단계 유형:

끌어서 재배열 합니다

Use the flat end of a spudger to disconnect the left fan connector from the logic board.

It is useful to twist the spudger axially from beneath the fan cable wires to release the connector.

The fan socket and the fan connector can be seen in the second and third pictures. Be careful not to break the plastic fan socket off the logic board as you use your spudger to lift the fan connector straight up and out of its socket. The layout of the logic board shown in the second picture may look slightly different than your machine but the fan socket is the same.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.