주요 콘텐츠로 건너뛰기
도움말
6단계 편집 중 —

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 13개에 영향을 미칩니다.

단계 유형:

끌어서 재배열 합니다

To remove the logic board, two cylindrical rods must be inserted into the holes highlighted in red. Inserting instruments into any logic board holes other than the ones highlighted in red may destroy the logic board.

Insert a Mac mini Logic Board Removal Tool into the two holes highlighted in red. Be sure it makes contact with the outer case below the logic board before proceeding.

If you don't have a Logic Board Removal Tool handy, you can use two tools having a maximum diameter of 2.5 mm instead. Just insert one into each of the highlighted holes.

Carefully pull the tool toward the I/O board. The logic board and I/O board assembly should slightly slide out of the outer case.

Cease prying when the I/O board is visibly separated from the outer case. Remove the Mac mini Logic Board Removal tool.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.