주요 콘텐츠로 건너뛰기

Fix Your Stuff

Right to Repair

Parts & Tools

도움말
7단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Drill four 1.5mm~2mm(1/16"~5/64") diameter, 3mm(1/8") deep holes at the left and right side of panel at the position corresponding to original LCD panel. Do NOT drill the glass!!.

2 will be drilled on metal and then plastic, 2 on plastic. As said before, the metal is very hard! use high quality drill and be patient and avoid overheating, or you'll burn your hand or the plastic and LCD glass.

In these pics, the upper LCD is the original one, the bottom one is HV121P01.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.