Skip to main content
도움말
8단계 편집 중 —

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 모든 11 안내서에 영향을 미칩니다.

단계 유형:

끌어서 재배열 합니다

Use an iPod opening tool to slightly lift the top edge of the Wi-Fi antenna away from the logic board.

Use the tip of a spudger to pull the Wi-Fi retaining clips away from the inner frame.

Remove the Wi-Fi antenna from the iPhone. Make sure you don't lose the metal clips on the top of the cover where the 4.8mm screw attaches or the 4.8mm screw. That's the primary reason for abnormal Wi-Fi performance after the reassembly.

Before reassembly, be sure to clean all metal-to-metal contact points on the connector cover with a de-greaser such as Windex. The oils on your fingers have the potential to cause wireless interference issues. Do not clean the connectors themselves with Windex.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.