주요 콘텐츠로 건너뛰기
도움말
2단계 편집 중 —

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 2개에 영향을 미칩니다.

단계 유형:

끌어서 재배열 합니다

Gently pull the battery adhesive tab away from the battery, toward the bottom of the iPhone.

Try not to pull against the battery or the lower components, or you may rip the adhesive strip.

Continue pulling, allowing the strip to slowly slip out from between the battery and the rear case. When you feel increased resistance from the strip, stop pulling and continue with the next step.

If the battery adhesive tabs break off at any point during the removal process, use your fingers or blunt tweezers to retrieve the remaining length of adhesive, and continue pulling.

If one of the adhesive strips breaks under the battery during this procedure, and cannot be retrieved, remove the remaining strip, and then proceed to Step 44.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.