Skip to main content
도움말
5단계 편집 중 —

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 모든 2 안내서에 영향을 미칩니다.

단계 유형:

끌어서 재배열 합니다

When you feel increased resistance from the adhesive strip, pull it gently around the lower left corner of the battery.

Don't allow the adhesive strip to snag on the corner of the battery, or it may tear or break off.

Continue pulling the adhesive tab upward and away from the left edge of the battery, allowing it to slowly slide out from between the battery and the rear case, until the strip comes free from the iPhone.

If you removed both adhesive strips successfully, skip the next two steps and continue on Step 46.

If either of the adhesive strips broke off underneath the battery and could not be retrieved, continue with the next step below.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.