주요 콘텐츠로 건너뛰기
도움말
8단계 편집 중 —

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 3개에 영향을 미칩니다.

단계 유형:

끌어서 재배열 합니다

Slowly and gently lift the top edge of the front panel assembly away from the steel inner frame.

Continue to rotate the front panel assembly away from the steel inner frame until it slowly begins to peel off the adhesive applied below the home button area.

It may be easiest to insert a spudger at the top and work it around the edges, spreading gently as you go.

Carefully pull the lower edge of the front panel assembly away from the steel inner frame.

Be careful, if the home button sticks to the front panel you may tear the home button cable.

Do not pull the front glass completely away from the frame. Doing so may result In damage to the digitizer cable.

If the glass is cracked (which it probably is since you're replacing it) removing the panel is likely to cause it to bend, kicking off small shards of glass. Before you do this step, cover the front with clear tape, then perform the actual removal over a trash can. Protective eyewear would also be prudent.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.