주요 콘텐츠로 건너뛰기
도움말
3단계 편집 중 —

알림: 귀하는 지금 열람하신 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 모든 2 안내서에 영향을 미칩니다.

단계 유형:

끌어서 재배열 합니다

Repeat for the second strip.

Hold down the battery as you remove the second strip, or the strip may fling the battery when it separates from the case.

If the adhesive breaks off underneath the battery and can't be retrieved, apply a few drops of high concentration (over 90%) isopropyl alcohol under the edge of the battery in the area of the broken adhesive strip(s).

Wait about one minute for the alcohol solution to weaken the adhesive. Use the flat end of a spudger to gently lift the battery.

Don't try to forcefully lever the battery out. If needed, apply a few more drops of alcohol to further weaken the adhesive. Never deform or puncture the battery with your pry tool.

Do not pry against the logic board or you may damage the phone.

Do not insert the spudger in the area between the volume down (-) button and the top edge of the battery, or you may damage the volume control cable lying underneath.

For more alternative methods when either of the adhesive strips broke off underneath the battery and could not be retrieved, continue with the next step below.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.