1
2
3
4
5
6
7
8
Remove the two 3.0mm screws holding down the black tabs using the Phillips #00 screwdriver.
Each screw is holding a black tab down onto the silver LCD. When the screws are removed these black tabs will fall off.
When putting the device back together, the screws go through the middle holes of the black tabs.
« 이전
다음 »
귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.
다음 줄
이전 줄
아래에 새로운 줄 삽입
위에 새로운 줄 삽입
현재 줄 들여쓰기
현재 줄 내어쓰기
현재 줄 삭제
다음 단계로 이동.
이전 단계로 이동.
도움말 열기