주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

도움말
6단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Underneath the air cleaner housing you'll find the bracket. It bolts to the exhaust manifold.

Not pictured are the three rubber buffers that screw in to the bracket, which the 10mm nuts in the air cleaner housing were attached to. They help absorbs some of the vibration to the housing.

If the rubber buffers don't unscrew by hand use a pair of pliers to grip them and unscrew them from the bracket before continuing.

Then use a 13mm socket and socket wrench to remove the two 13mm bolts on top of the bracket, and then switch to a 10mm socket to remove the bolt that holds the oil feed line for the turbo to the bracket.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.