Skip to main content
도움말
3단계 편집 중 —

알림: 귀하는 지금 열람하신 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 모든 3 안내서에 영향을 미칩니다.

단계 유형:

끌어서 재배열 합니다

Position the rear side of the device (the side with Ethernet connectors) so that it is facing you.

Lift up the left side of the metal plate and slowly flip it over the right edge of the device.

To prevent damage, do not lift the metal plate straight up or use force. As shown in the second picture, the fan is attached to the metal plate and connected to the logic board next to the power connector.

Since many people have had serious problems with the fan power connnector breaking, it is advisable to NOT try to disconnect the fan power connector. Be VERY careful with this connector. It is extremely fragile. If you absolutely have to disconnect the fan from the logic board, VERY carefully use a spudger or tweezers to do so.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.