JD Razor 2000 Front Wheel Replacement

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 안내서에 영향을 미칩니다.

안내서로 돌아가기

영어

한국어

1 단계 번역중

1 단계

JD Razor 2000 Front Wheel Replacement, Removing the 1.75" Axle Bolt: 0 단계, 이미지 3개 중 1개

JD Razor 2000 Front Wheel Replacement, Removing the 1.75" Axle Bolt: 0 단계, 이미지 3개 중 2개

JD Razor 2000 Front Wheel Replacement, Removing the 1.75" Axle Bolt: 0 단계, 이미지 3개 중 3개

Removing the 1.75" Axle Bolt

Orient the scooter so that the front wheel is facing you. Observe the right and left side of the wheel. Remember which is which throughout the guide.
Using an Allen wrench, unscrew the axle bolt slowly from the right side while applying a constant pressure with your hand on the left side of the bearing.
If the left side of the bolt turns while you unscrew the right side, you will need to use a second Allen wrench to prevent it from moving
If the bolt does not move at all, or moves very little, try applying a lubricant on as much of the screw as possible and try again in 5 minutes.
Carefully pull apart the bolt and bearing from either side of the wheel.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.