Skip to main content
7단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

If you are going to be using a screen assembly with a pre-installed frame, you may stop here and follow the previous steps in reverse with your new screen assembly. Otherwise, you will now transfer the LCD bezel as well as the speaker grille.

Remove the metal tape to reveal the ribbon cables connected to the screen

The metal tape is stuck on there pretty well. Get the plastic opening tool under the right-hand side and corners and slowly work your way to getting it off

Be careful when removing the metal tape. We can reuse it after we replace the screen

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.