주요 콘텐츠로 건너뛰기
도움말
1단계 편집 중 —

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 안내서에 영향을 미칩니다.

단계 유형:

끌어서 재배열 합니다

Insert the tip of a small flathead screwdriver between the X clamp and its retaining post on the heat sink.

Pry the X clamp away from its retaining post until it is lifted above the small groove cut into the retaining post.

If necessary, insert your screwdriver parallel to the motherboard between the X clamp and its retaining post. Twist the screwdriver to fully release the X clamp from its retaining post.

Repeat this process for all four corners of the X clamp.

When removing the last corner of the X clamp and holding the motherboard upside down, be sure to catch the CPU heat sink to avoid damage from it falling.

Remove the CPU heat sink from the motherboard. When reinstalling the CPU heat sink, be sure to apply a new layer of thermal paste.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.