주요 콘텐츠로 건너뛰기
도움말
3단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Remove the three top screws of the hard drive use a T8 bit and remove the heat sink.

Carefully slide the hard drive to the open side (side without the IDE and power cables) to remove the drive.

Turn the drive over, remove the sled rail with a T10 driver for its two screws. Transfer the rail to the same side on the new drive.

Insert new hard drive.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.