주요 콘텐츠로 건너뛰기
도움말
7단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Do not use alcohol unless you are out of options. This may damage the printhead! Purge the printhead 3 times if alcohol is used to avoid problems.

Recommended circulation times: Alcohol: 5-10 minutes. Without alcohol: 15 minutes.

The water will get lighter as the ink breaks down. An ultrasonic cleaner can be used on stubborn clogs.

Pour hot water into a bowl and let the printhead sit. Change the water until the printhead is reasonably clean.

Dry the printhead contacts and nozzles by hand to ensure these areas are dry.

Before reinstalling the printhead, let it air dry for ~3-4 hours. Use a fan to reduce the dry time.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.