주요 콘텐츠로 건너뛰기
도움말
8단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Since the calibration will be erased if the printer errors out, wait until the printhead is bone dry before installation. Printhead initialization uses 1/2 of your ink (non-XL).

While the printhead will not be seen as "new", a unavoidable Printhead Preparation process must run.

Once the printhead is satisfactorily dry, reinstall the printhed and ink in the reverse order they were removed. Plug the printer in when installed.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.