Skip to main content
도움말
4단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Mark the wires and note how the cables are routed, so you can return them to their original routes after disassembly.

Either apply wire labels, or take a fine-tipped permanent marker and as you disconnect each connector mark it with the two letter name of the mating socket, which you will find stamped on the plastic of the control unit's housing. A flashlight will help reading the letters along the left side of the control unit.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.