주요 콘텐츠로 건너뛰기
도움말
10단계 편집 중 —

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 9개에 영향을 미칩니다.

단계 유형:

끌어서 재배열 합니다

During the glass removal process, the camera cable may stick to the adhesive on the glass panel, disconnecting it from the camera board as the panel is lifted. If your camera cable is still connected to the camera board, skip this step.

To reconnect the cable, first use the tip of a spudger to remove the piece of foam tape over the camera cable ZIF socket.

Use the tip of a spudger to flip up the ZIF cable retainer on the camera cable socket.

Insert the camera cable into its socket on the camera board and use the tip of a spudger to snap down the ZIF cable retainer, locking the cable in place.

Reapply the piece of tape covering the camera cable socket.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.