도움말
2단계 편집 중 —

알림: 귀하는 지금 열람하신 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 모든 9 안내서에 영향을 미칩니다.

단계 유형:

끌어서 재배열 합니다

With the panel sufficiently heated, fasten a heavy-duty suction cup near the upper right corner of the display glass.

Don't fasten the suction cup on top of the rubber strip around the edge of the display glass.

To attach the suction cups we sell, first position the suction cup with the movable handle parallel to the face of the glass panel. While lightly holding the suction cup against the glass, raise the movable handle until it is parallel with the other handle.

Slowly and gently pull the corner of the display glass up off the display assembly.

If only the top edge of the glass lifts up (as seen in the third picture), repeat steps one and two until you can lift up the corner of the panel.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.