주요 콘텐츠로 건너뛰기
도움말
1단계 편집 중 —

알림: 귀하는 지금 열람하신 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 모든 6 안내서에 영향을 미칩니다.

단계 유형:

끌어서 재배열 합니다

Lay out a soft cloth on your workspace to prevent scratching the screen in this and future steps.

Pry open the back casing using the soft plastic opening pick.

Be careful of the Power & Volume Key ribbon on the left side just next to the volume key. The ribbon is exposed and could be damaged with the opening tool.

Carefully pull the back casing apart from the rest of the phone with your hands. Because the casing is glued to the rest of the phone, this step may require some force. Don't be alarmed if the casing flexes a bit.

You may need an iOpener to loosen up the adhesive. Check out the iOpener Instructions for info on how to use it.

You can use a Small Suction Cup on the bottom corner to slightly lift up the back casing and help slipping the tool under the cover.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.