주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

도움말
2단계 편집 중 —

알림: 귀하는 지금 열람하신 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 모든 5 안내서에 영향을 미칩니다.

단계 유형:

끌어서 재배열 합니다

This is a good time to power on your iPad and test all functions before you seal the display in place. Be sure to power your iPad back down completely before you continue.

If you're installing a new front panel assembly, it may need the following preparation:

Peel the large clear plastic liner off of the inside of the glass.

Peel any blue plastic backings covering the adhesive around the perimeter of the front panel assembly.

Once removed, the adhesive strips will be exposed. Don't remove these backings until you're ready to install the front panel assembly.

Don't remove any copper coverings from the outlined region, such as yellow kapton tape or black electrical tape.

Ensure the glass panel is free of fingerprints and grime before installing it on your device.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.