Skip to main content
도움말
29단계 편집 중 —

알림: 귀하는 지금 열람하신 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 모든 48 안내서에 영향을 미칩니다.

단계 유형:

끌어서 재배열 합니다

Do not attempt to fully remove the LCD. It is still connected to the iPad by several cables at the home button end. Lift only from the front-facing camera end.

Insert the flat end of a spudger under the LCD between it and the LCD shield plate and lift gently.

Be very careful not to get the spudger under the shield plate. It must be between the LCD and the shield.

Even bending the LCD slightly can permanently damage it, so be extremely careful as you lift.

There are two long thin strips of adhesive (one on either side) that run along the edges of the display.

To reduce chances of cracking the LCD the two most used methods without prying up are:

Running a thin fishing line under the display starting from the top then working your way down

Using a thin plastic card or a plastic money note to cut through the adhesive starting from the top.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.