메인 컨텐츠로 가기
도움말
3단계 편집 중 —

알림: 귀하는 지금 열람하신 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 모든 5 안내서에 영향을 미칩니다.

단계 유형:

끌어서 재배열 합니다

Use an iPod opening tool to slightly lift the edge of the logic board next to the battery enough to grab it with your other hand.

Do not excessively bend the logic board, as it is very thin and fragile.

Be very careful not to lift too much as the volume control ribbon cable is still connected and will tear very easily.

While gently lifting the logic board with one hand, use an iPod opening tool to lift the logic board near the copper tape at the logic board's top edge.

The logic board will be lifted adequately when the last display assembly connector has cleared the top edge of the rear case.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.