Skip to main content
5단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Using pair of channel locks or large pliers, pinch together and pull back the hose clamp securing the hose to the coolant intake.

If the factory hose clamps have been replaced, you may need a screwdriver to remove the replacement hose clamps.

There is probably still coolant in the tube so try not to spill it everywhere when removing the hose.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.