주요 콘텐츠로 건너뛰기

Sony Cyber-shot DSC-W290 Flash Bulb Assembly Replacement

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 3개에 영향을 미칩니다.

2 단계 번역중

2 단계
Sony Cyber-shot DSC-W290 Flash Bulb Assembly Replacement: 0 단계, 이미지 3개 중 1개 Sony Cyber-shot DSC-W290 Flash Bulb Assembly Replacement: 0 단계, 이미지 3개 중 2개 Sony Cyber-shot DSC-W290 Flash Bulb Assembly Replacement: 0 단계, 이미지 3개 중 3개
  • Tilt top casing up and towards you.

  • Carefully remove the right ribbon-wire from the top camera panel by pulling where the wire connects to the top.

  • Make sure to hold the camera with your thumb on the white square to ensure the ribbon-wire is not disconnected from the motherboard.

  • Carefully remove the left ribbon-wire from the top camera panel by pulling where the wire connects to the top.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.