주요 콘텐츠로 건너뛰기

Nikon Coolpix P90 Motherboard Replacement

1 단계 번역중

1 단계
Nikon Coolpix P90 Motherboard Replacement: 0 단계, 이미지 3개 중 1개 Nikon Coolpix P90 Motherboard Replacement: 0 단계, 이미지 3개 중 2개 Nikon Coolpix P90 Motherboard Replacement: 0 단계, 이미지 3개 중 3개
  • Use a Phillips #000 Precision Screwdriver for all of the following steps.

  • Remove both 4.5 mm screws holding the bottom into place.

  • Remove both 4.5 mm screws holding the side into place.

  • Remove the 4.5 mm screw underneath the A/V flap.

  • Remove the 4.0 mm screw on the left-side wrist strap loop.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.