주요 콘텐츠로 건너뛰기
도움말
5단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Use a T15 Torx screwdriver to remove the dock from the base. Be careful not to damage the ribbon during this step.

There is a torsion spring under the dock. When removed, this spring has a tendency to fly out. To avoid this, loosen the dock until it is able to move freely. Rotate it so that there is no tension in the spring. Then, you are free to undo the screw completely.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.