주요 콘텐츠로 건너뛰기
도움말
14단계 편집 중 —

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 5개에 영향을 미칩니다.

단계 유형:

끌어서 재배열 합니다

Use scissors to cut one of your opening picks to about the width of the battery. Try not to leave any sharp corners.

Insert the modified pick between the right side of the battery and the case.

Use constant, steady pressure to slowly pry the battery up, separating it from the adhesive securing it to the system board.

Be careful not to deform or puncture the battery.

On the larger (42 mm) models, it's possible to accidentally pry at the system board underneath the battery. Insert the pick only far enough to get underneath the battery, not the system board.

If needed, apply a little high concentration isopropyl alcohol (90% or greater) around and under the battery to help weaken the adhesive.

Do not attempt to remove the battery as it is still connected.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.