1
2
Remove the three M5-0.8 x 12 mm Phillips #0 screws from the back of the device body
Remove two more screws from inside the battery compartment
Cautiously remove the back of the device body so that the cord, which connects both sides, is not damaged.
[All screws are the same size]
« 소개
다음 »
귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.
다음 줄
이전 줄
아래에 새로운 줄 삽입
위에 새로운 줄 삽입
현재 줄 들여쓰기
현재 줄 내어쓰기
현재 줄 삭제
다음 단계로 이동.
이전 단계로 이동.
도움말 열기