주요 콘텐츠로 건너뛰기
도움말
10단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Carefully desolder the 3 wires for the old battery pack. Feed the new battery pack wires through from front of toy. Solder the new battery pack wires on ensuring that the correct wires are on the correct terminals of motherboard.

replace motherboard in casing, secure with 4 screws.

Reconnect wire for head, reinsert head into fur cover.

Place front legs in fur cover, then rear legs and tail. Make sure all wire limbs are covered with filling.

Use 2 strands of embroidery thread to close back seam.

Use cotton thread running stitch to close pouch around battery pack wires.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.