주요 콘텐츠로 건너뛰기
도움말
7단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Place the soldering iron onto the battery wire and metal connector for one to two seconds to heat them up.

Add the solder wire and wait for the solder to melt onto the wire. Once a small bead has formed around the wire, lift the solder away first and then remove the soldering iron.

Continue with the other two connections the same way, taking special care not to solder two of the connectors together.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.