Skip to main content
1단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

First off unplug the monitor from power as well as from the back of the computer. Find a flat surface and lay the monitor on its face so that you can get to the back of it. The screws that hold the monitor stand on are covered by a small plastic bezel ( shown in photo with the red arrow). This is held on with just pressure and if you squeeze at the points mark with a blue circle it should pop free and the bezel can be removed.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.