메인 콘텐츠로 스킵하기
도움말
5단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Once the back is open you can reach this wire and unplug it from the controller board. This is a wire that is plugged in and can be removed. I have seen issues with this being very tight before and you also pull the plug and the connector off the solder leads, so be careful. Once this speaker wire has been unplugged you can set this case piece out of the way. (need better photo)

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.