주요 콘텐츠로 건너뛰기
도움말
11단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Now flip the circuit board over and de-solder the capacitor. As this cap is close to the edge of the board it shouldn't be to hard to figure out which two points need de-soldered to get the cap free. A hot iron and the solder wic should have the cap free in just a couple moments. I have de-soldered the wrong component before so double check yourself.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.