메인 콘텐츠로 스킵하기
도움말
12단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

The new capacitor can be installed and soldered in now. As you do this you need to pay attention to polarity of the cap. The negative lead is marked on the new capacitor with a gray strip and the '-' symbol in that strip, as seen in the first photo. The negative spot on the circuit board is shown by the black half of the circle on the circuit board. There is also a '+' sign next to the other hole as well. Be sure the negative lead of the capacitor goes into the negative hole of the board, and then solder down the new cap.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.