Skip to main content
14단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

At this point the hard work is done. The monitor now needs to be rebuilt. Put the power supply board back in place and replace the 4 screws that were removed. Once these are in then reattach the 5 cables there were unplugged. They should be resting right were they need plugged in, so it shouldn't be that hard to figure out where they go. Here is the same picture you saw a few steps ago just as a reminder.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.