Skip to main content
18단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Last step is to reattach the monitor stand with the 8 screws that were removed and then to reattach the plastic bezel that covered them. Here is a photo of the screws to show alignment. These are the screw locations for the left hand set of holes. Flip it over for the right hand set of screws. Then press the bezel into place and you should be done.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.