주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

도움말
5단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Once the tool is at the required depth and location that side of the sleeve and connector can be released.

Remove the tool and repeat on the other side of the shell. Be careful not to push the first side back in to the shell in the process.

Once both sides are released slide the outer shell down the cable.

Wrap the frayed cable with a little tape if it is difficult to get through the hole in the shell.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.