주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

도움말
3단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Using a fingernail or spudger, flip up the retaining flap on the following three ZIF connectors.

Action button contact pad ribbon

UMD drive ribbon

Be sure you are prying up on the retaining flap, not the socket itself.

Use your fingernail or tip of a spudger to push both sides of the black retaining flap on the UMD laser ribbon socket to the right.

Use your fingers or a spudger to gently pull all three ribbon cables straight out of their sockets.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.