주요 콘텐츠로 건너뛰기
도움말
3단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

View without cover.

Here is the water pump.

Water tank

Inlet, remove the two screws as it is attached to the pump

Remove these screws to free the pump. once free *carefully* cut the cable ties on the two hoses so it can be removed

Once all the lines are free you will need to un-solder the two wires attached to the pump so that it can be fully removed.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.