Skip to main content
2단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Step 2: is simple. Simply put clear tape or anti static tape on the logic board PCB of the original hard from the iMac . Making sure it wont touch anything, as safety.

MAKE SURE YOU PLUG IN only the temperature sensor cable FROM the iMac to the hard drive Logic board we have taped to the iMacs back housing, this is *crucial. This will make the iMac control the fan speed as normal. :)

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.