Samsung Gear 2 Neo Display Replacement

영어

한국어

7 단계 번역중

7 단계

Removing the AMOLED Display

The AMOLED display is secured to the front watch assembly with adhesive in two different ways; one being an adhesive ring around the edge, and two being a small adhesive application between the display and front watch assembly.
In order to free the display, use a spudger to gently apply pressure to the back of the AMOLED panel until the top half the the display separates from the front panel.
Do not attempt to force the display all the way off of the front assembly in this step. Doing so will likely flex the AMOLED display enough to shatter it. The adhesive application on the backside of the display must first be removed.
Once the top half of the display has been separated from the front panel, use a spudger to clear the adhesive from the underside of the display.
When the underside of the display has been cleared of adhesive, continue to apply pressure with the spudger until the display comes free of the front watch assembly.
Be sure to leave the adhesive ring in place once the display has been removed; it is critical for installing the new AMOLED display.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.