Skip to main content
도움말
1단계 편집 중 —

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 모든 8 안내서에 영향을 미칩니다.

단계 유형:

끌어서 재배열 합니다

Insert a plastic opening pick between the case and the battery.

Be careful to keep the pick as flat as possible to avoid bending the battery, which may damage it and cause it to release dangerous chemicals.

Push the pick further in to separate the battery from the phone.

If the battery is too strongly adhered for the opening pick, place a warm iOpener over the battery to loosen the adhesive.

Alternatively, apply some isopropyl alcohol under each corner of the battery and allow it to penetrate for several minutes to help weaken the adhesive.

Do not pry against the motherboard or you may damage the phone.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.