주요 콘텐츠로 건너뛰기
도움말
4단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Place the desoldering wick on top of the existing solder ball.

Place the soldering iron on top of wick above the existing solder ball.

Hold the soldering iron in place until the solder melts into the wick.

Repeat the same procedure on the remaining two connectors.

Lift the old battery out of the iPhone. Be sure that all the solder has been removed before pulling the wires away from the board. The wires should come free with little to no resistance.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.