Skip to main content
Help
5단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

We recommend that you clean the exposed surface of the board with a soft cloth or sponge and a small amount of rubbing alcohol.

Melt a small solder bead directly onto the metal connector on the board by placing the soldering iron onto the metal connector and then pressing solder against the tip and the board.

Once a small amount of solder has melted onto the board, lift the solder away first and then the soldering iron.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.