메인 컨텐츠로 가기
도움말
4단계 편집 중 —

알림: 귀하는 지금 열람하신 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 모든 20 안내서에 영향을 미칩니다.

단계 유형:

끌어서 재배열 합니다

Hold the iPod firmly against a table or bench.

Place your thumb and index finger over the lower corners of the display to stop the display from opening too far when the adhesive breaks.

Lift the suction cup up and back toward the top of the iPod. Be patient, and pull with firm, constant force until the adhesive breaks and the display comes up from the rear case.

It may be necessary to use a heat gun to soften the adhesive (especially in cooler climates). If you can pry the screen apart, and the adhesive is still sticking and pulling apart like cheese topping on a pizza, you can slide a thin razor blade in and gently cut the adhesive.

After the display begins to lift from the rear case, be careful not to lift more than about an inch—a fragile plastic frame still connects the display assembly to the rear case.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.