주요 콘텐츠로 건너뛰기
도움말
2단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Remove any visible debris that may be blocking the CHP Mode Switch.

Using the Q-tip gently wipe away any dust, dirt or residue, in and around the switch.

Once you are sure the switch is clean, test it gently by sliding it back and forth between the 'C', the 'H', and the 'P'. If the switch is clean there should be very little resistance and the switch should glide smoothly from one mode to the next.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.